This project is read-only.

Rhyduino.PinMode Enumeration

The valid I/O states for digital pins.


  • Analog Put pin into analog output mode (Code: 2)
  • Input Put pin into input mode (Code: 0)
  • None The pin mode enumeration is not initialized.
  • Output Put pin into digitial output mode (Code: 1)
  • Pwm Put pin into pulse width modulation output mode (Code: 3)
  • Servo Put pin into servo control mode (Code: 4)

Last edited Jul 4, 2010 at 10:41 PM by RhyMednick, version 2


No comments yet.